Leapfrog Blue 8ft trampoline package

Skip to product information
1 of 1
RRP £369.99
THIS WEEK ONLY £149.99
FREE NEXT DAY DELIVERY
  • ✔ 8ft trampoline
  • ✔ 42 x 137 mm springs
  • ✔ 1.0 mm steel frame
  • ✔ PP woven jump mat
  • ✔ UV resistant PVC Padding
PACKAGE INCLUDES
  • ✔✔ FREE 1.8 m Safety enclosure
  • ✔✔ FREE ladder
  • ✔✔ FREE spring tensioning tool
IN STOCK | FREE NEXT DAY DELIVERY
View full details

This trampoline is a 'standard' trampoline and will give the best bounce characteristics for lighter jumpers, although it will take a maximum user weight of 80 kg (12.6 stone). It sits 51 cm from the ground and its 8ft frame gives a 6.6 ft jump area.

Trampoline Dimensions

  • Trampoline height: 51 cm
  • Safety net height: 180 cm
  • Total height: 231 cm
  • Jump mat width: 203 cm
  • Total width: 244 cm
Trampoline Dimensions

Trampoline Dimensions

Sturdy Frame

This trampoline comes with a frame made from 1.0mm steel. It is tough and durable and more than adequate for domestic use. The frame Is hot galvanised inside and out to give lasting protection against rust or corrosion. The legs have a recurved design which provides impact resistance and durability.

Responsive Springs

The 42 springs used in this trampoline are made of 3.2mm steel, and the length and width have been selected to give the correct level of tension. The number of springs in a trampoline affects its bounce characteristics. A lower number of springs will make a trampoline more springy but less powerful; a higher number of springs gives a trampoline greater lift potential but it needs more weight to stretch the springs. So for smaller, lighter children choosing a trampoline with too many springs may be counter-productive, but as they get bigger and heavier the added power will give them greater lift.

High Spec Jump Mat

The mat used for this trampoline is an American-designed polyprolylene mat, which has enough elasticity to be comfortable to bounce on and not to wear out, but is durable enough not to stretch. It is also permeable, allowing air through to improve the bounce and allowing water to drain away easily if it gets wet. It is also UV-resistant to protect against sun damage.

Tough Stitching

At least 6 layers of stitching are used to attach the rings to the edge of the mat, giving more than enough strength and protection for your peace of mind. The rings used are an angular shape, rather than round, as they have proven to be tougher and to hold the shape of the bounce mat more effectively.

Safety Padding

The edge of the trampoline and the springs are covered with a closed cell foam padding, which provides much better water resistance than some cheaper foams do. This padding is deliberately wide, protruding into the mat slightly and wrapping around the edge of the frame outside to ensure that all these parts are covered.

Safety Enclosure

We are passionate about safety and will only sell trampolines with safety enclosures as we believe them to be extremely important. The net on this trampoline can be fixed into the underside of the trampoline to ensure there are no gaps, and the poles are held in place by specially moulded clips to prevent unwanted slips or movement.